Home · Blog · OITDS vs VTS vs FMS
Blog · Fleet systems

OITDS vs VTS vs FMS: which does your mine need?

A vehicle tracking system (VTS) shows where each vehicle is. An OITDS uses that position, plus shovel status and queues, to decide which shovel each dumper goes to next. A fleet management system (FMS) covers dispatch and everything around it: fuel, maintenance, operators, reports. Most mines start with tracking and grow into dispatch.

Excavator loading at the face, the shovel end of truck dispatch
01 VTS

VTS: where every vehicle is

A GPS tracker on each vehicle sends position and speed. You get a live map, route history, geofence and overspeed alerts. It does not decide anything: the operator or radio dispatcher still chooses where each truck goes.

02 OITDS

OITDS: where each dumper should go next

An in-cab terminal shows the operator the next assignment, computed from shovel capacity, haul distance, queues and grade targets. Every trip is logged with its load point, dump point, cycle times and payload.

How OITDS works →
03 FMS

FMS: the whole fleet in one system

A fleet management system adds fuel per trip and per tonne, machine hours and maintenance, operator attendance, contractor billing and shift reports on top of dispatch.

Fleet management →
04 Choosing

Which one fits your mine

If the question is where vehicles are, VTS answers it. If trucks queue at one shovel while another waits, you need dispatch. If fuel, maintenance and billing live in separate spreadsheets, you need an FMS. Systems that share one terminal let you start with one and add the rest.

Compare mining FMS software →
05 Coal and PSU mines

What Coal India's roadmap says

The Ministry of Coal's technology roadmap notes that OITDS in most Coal India mines is used only to track vehicles, and plans automatic allocation of dumpers to shovels in the top 75 mines.

OITDS in Coal India mines →
Source

Ministry of Coal, Technology Roadmap for Coal Sector (May 2022), section 7

OITDS mostly used for tracking; plan for automatic allocation in the top 75 Coal India mines.

Open the source →
Mohit Sahu, Co-founder and Tech Lead, Minocular
About the author

Mohit Sahu

Mohit is a mining engineering graduate of NIT Raipur. He leads Minocular's product and engineering, from fleet dispatch to the drone and AI platforms.

Questions about OITDS, VTS and FMS

What is the difference between OITDS and VTS?

VTS shows where each vehicle is. OITDS uses that data plus shovel status and queues to decide which shovel each dumper goes to next, and records every trip.

Is OITDS part of a fleet management system?

Usually, yes. Dispatch is one module of a mining FMS, alongside fuel, maintenance, operators and reports.

Can a mine move from VTS to OITDS without replacing hardware?

Only if the tracker can show assignments to the operator. A plain GPS tracker has no screen, so dispatch needs an in-cab terminal.

Does a small mine need OITDS?

If there are few shovels and trucks rarely queue, tracking and trip counting may be enough. Dispatch pays off when queues and idle shovels show up in the cycle data.

What does FMS stand for in mining?

Fleet management system: software and in-cab hardware that run dispatch, fuel, maintenance, operators and reporting for the mining fleet.

Related
SOLUTION
OITDS truck dispatch
PRODUCT
Mining fleet management
COMPARISON
Best mining FMS software
BLOG
OITDS tender checklist
See which fits your mine in a 30-minute demo.
Book a Demo